Civil Engineer

SummaryAbout the Position: Fort Gordon is approximately 139 miles east of Atlanta, GA; 80 miles southwest of Columbia, SC; 156 miles west of Charleston, SC; 175 miles southwest of Charlotte, NC; and 127 miles northwest of Savannah, Georgia. Fort Gordon's location is in the Augusta metropolitan area (also known as the Central Savannah River Area-CSRA) and is an easy drive to Atlanta, Savannah, Charleston, Charlotte, the beaches along the Atlantic Ocean, and the mountains.ResponsibilitiesPrepare plans/designs to present recommending solutions to decision makers.Evaluate plans, designs and construction submittals to ensure project requirements and governing Codes/Regulations are met.Communicate with construction contractor to resolve problems or latent conditions that may arise during construction.Utilize computer-aided design and drafting (CADD) software system to depict road/highway, parking lot, bridge, sanitary and storm water drainage systems.Conduct investigations of sites, structural, roads/highway, bridge, sanitary and/or storm drainage systems to determine if the condition meets appropriate regulations.Research engineering technical problems to provide alternative solutions.Design structural systems for roads/highway, pavement systems, bridges, earthen dams and site utility layouts and/or storm drainage systems.Design statically determinate and indeterminate structures for assigned projects.RequirementsConditions of EmploymentQualificationsWho May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Permanent Department of Defense (DOD) Civilian Employee (non-Army)Defense Civilian Intelligence Personnel System (DCIPS) Interchange AgreementExecutive Order (E.O.) 12721Interagency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Appropriated Fund Instrumentality (NAFI)Non-Department of Defense (DoD) TransferPriority Placement Program, DoD Military Spouse Preference (MSP) EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Civil Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.ORB. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: GS-9 Level Specialized Experience: One year of specialized experience which includes experience in reviewing and recommending approval or disapproval of contractor's requests for payment, schedules of prices, and payrolls. Experience in providing surveillance over contractor's work to assure completion in accordance with plans and specifications and to note needed changes or difficulties arising from field conditions. . This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07). OR Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering Degree. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages. See Qualifications Continuation in the Education Section You will be evaluated on the basis of your level of competency in the following areas:Building and ConstructionCivil EngineeringDesignGeneral EngineeringTechnology Application GS-09 Level Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-07). GS-11 Level Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-09).EducationContinued Qualifications: GS-11 Level Specialized Experience: One year of specialized experience which includes experience in identifying design criteria including alternative methods of design, range of materials, and varieties of equipment acceptable to the Government. Experience in development of designs and specifications for: 1) foundation and /or soil requirements; 2) location of sewer mains, local water pressure, plumbing utilization and land utilization; 3) development of statement of works and 4) development of independent cost estimates. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09). OR Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as an Engineering Degree. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.Additional InformationMale applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. Two year trial/probationary period may be required. Direct deposit of pay is required. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. This is a Career Program (CP) 18 - Engineering and Scientific position. You may claim military spouse preference (MSP). If a MSP applicant is determined best qualified and selected, placement must be at the full performance level for priority consideration. Multiple positions may be filled from this announcement. Salary includes applicable locality pay or Local Market Supplement. If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application. Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.