03 Jul
GENERAL ENGINEER
Wyoming, Fewarrenafb

    Duties

    Summary

    Click on "" button below to view Eligibilities being considered and other IMPORTANT information.

    The primary purpose of this position is to serve as a professional general engineer, performing design, project programming, construction management/monitoring duties and improvement projects of real property facilities and infrastructure, including utility systems in support of a military installation.

    Responsibilities

    • Performs planning and design work for substantial multi-phase new construction, renovations, and improvement projects for real property facilities, including utility systems, utilizing a professional knowledge of engineering.
    • Manages projects for new construction, renovations, and improvements to real property facilities and maintains surveillance over construction contractors utilizing a
    • contprofessional knowledge of general engineering and knowledge of architecture to ensure overall compliance with contracted specifications, schedules, etc.
    • Plans, programs, budgets, and executes required projects in support of assigned programs.
    • Performs work in facilities operations and maintenance (O and M) functions. Provides consulting services and project coordination.
    • Collects data and evaluates factors which affect the application of concepts, principles, theories, and methods required to observe, examine, measure, analyze, map, and describe physical and technical features and phenomena.
    • Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.

    Travel Required

    Occasional travel - You may be expected to travel for this position.

    Supervisory status

    No

    Promotion Potential

    12

  • Job family (Series)

    0801 General Engineering

  • Requirements

    Requirements

    Conditions of Employment

    • Must complete initial online questionnaire and additional assessment(s)
    • U.S. Citizenship is required
    • Males must be registered for Selective Service, see www.sss.gov
    • Must be able to obtain and maintain a Secret Security Clearance
    • This position is subject to provisions of the DoD Priority Placement Program
    • Work may occasionally require travel away from the normal duty station on military and commercial aircraft.
    • The work may require the employee to drive a motor vehicle. An appropriate, valid driver?s license may be required for the position.
    • May act as project liaison with the Army Corps of Engineers or other design agencies as required.
    • Disclosure of Political Appointments
    • All federal employees are required to have direct deposit.
    • May be required to serve on A and E selection boards.
    • The employee must meet the Defense Acquisition Workforce Improvement Act (DAWIA) requirements applicable to the duties of the position.
    • The selectee will have up to 24 months to meet the applicable mandatory experience, education, and training requirements.

    Qualifications

    In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific PositionsSPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-11, or equivalent in other pay systems. Examples of specialized experience includes applying knowledge of civil, mechanical and electrical engineering concepts, principles, and practices applicable to a broad range of engineering, construction management, life cycle management, etc. and related assignments; establishing design parameters and preparing project justifications and specifications; drafting techniques and conventions and drafting skills sufficient to convey design concepts and ideas and formulate working drawings; developing solutions to problems such as procedures and methods of installation of material, extent or scope of work to be performed, quality of materials to be installed, and acceptable levels of workmanship; planning and monitoring large-scale projects to assure compliance with applicable objectives, standards, and requirements; and modifying standard practices and adapt equipment or techniques to solve a variety of problems.

    To view the individual occupational requirement, please click here: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/

    To view the minimum education/experience for this position: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROFFEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-11 level is required to meet the time-in-grade requirements for the GS-12 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks.KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

    1. Professional knowledge of civil, mechanical and electrical engineering concepts, principles, and practices and familiarity with architectural and other engineering disciplines

    2. Knowledge of a broad range of engineering and construction standards, methods, practices, and techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations; of standard contracting regulations, practices, and procedures as it relates to facilities engineering; knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders; of environmental principles, practices, procedures, laws, regulations, and current legislative issues; of work classifications and the regulatory and statutory restrictions on the expenditures of appropriated and non- appropriated funds

    3. Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively accomplish assigned functions; and knowledge of program planning and budgeting cycles, financial control and budget systems and management.

    4. Knowledge of aesthetic and functional design techniques and skill in preparing project documentation, to include preliminary drawings, sketches, and construction drawings; and technique / skill in drafting sufficient to convey design concepts and ideas and formulate working drawings.

    5. Ability to plan, conduct and record site/facilities surveys and inspection; to analyze, interpret, and apply results, rules, regulations, and procedures in a variety of situations and recommend timely and economical solutions.

    6. Ability to plan and organize work and coordinate with other engineering disciplines and architects; and communicate effectively both orally and in writing and maintain good working relationships.PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.

    Education

    IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.ADDITIONAL INFORMATION FOR ACTIVE DUTY SERVICES MEMBERSACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD-Form 214, Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD-Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:

    • Name/Rank/Grade of Service Member
    • Branch of Armed Forces
    • Dates of Active Service (Start and End Date(s)
    • Expected Date of Discharge/Release from Active Duty
    • Terminal leave start date (if applicable)
    • Expected character of service/discharge and type of separation (i.e. separation or retirement)
    • Must be certified within 120 days of anticipated discharge
    • Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.

      Note: The VOW Act provides tentative preference. If appointed, a DD Form-214 must be submitted upon receipt.

    Additional information

    Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected at the full performance level and placed at the full performance level.OPTIONAL DOCUMENTS:Performance Appraisals for Current Federal Civilian Employees - Most recent performance appraisals (dated within last 3 years) showing the official rating of record signed by a supervisor.Awards for Current Federal Civilian employees - List any awards received within the last 3 years on the resume.Note: Applicant must not submit award SF50s-Notification of Personnel Actions (SF50s).If you have questions regarding this announcement and have hearing or speech difficulties click here.

    How You Will Be Evaluated

    You will be evaluated for this job based on how well you meet the qualifications above.

    You will be evaluated based on how well you meet the qualifications listed in this vacancy announcement. Your qualifications will be evaluated based on your application materials (e.g., resume, supporting documents), the responses you provide on the application questionnaire, and the result of the online assessments required for this position. You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics):

    Occupational Judgement Assessment

    Occupational Reasoning Assessment

    Occupational Reading

    Computer Adaptive Occupational Interaction

    The resume/documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.BASIS OF RATING: The assessments for this job will also measure

    • Knowledge, Skills and Abilities (KSA) as listed under Qualifications
    In order to be considered for this position, you must complete all required steps in the process. In addition to the application and application questionnaire, this position requires an online assessment. The online assessment measures critical general competencies required to perform the job.

    Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on the online assessment may also result in your removal from consideration.

    Background checks and security clearance

    Security clearance

    Secret

    Drug test required

    Yes

    Position sensitivity and risk

    Noncritical-Sensitive (NCS)/Moderate Risk

    Trust determination process

  • Required Documents

    Required Documents

    The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.

    • Online Application: Questionnaire
    • Resume: For qualification determinations your resume must contain hours worked per week and dates of employment (i.e., month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient and you will not receive consideration for this position. If you are a current Federal employee or previous Federal employee, provide your pay plan, series and grade, i.e. GS-0301-09. Current Federal Civilian Employees should list any relevant performance related rating (given within the last three years) and/or incentive awards in your resume. Do NOT include photographs (or links to social media such as LinkedIn), inappropriate content, nor personal information such as age, gender, religion, social security number, etc., on your resume.
    • Transcripts/Registration/License: If qualifying based on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
    • Veterans: If claiming VRA, VEOA or Veterans' Preference - Submit VOW certification memo or copy of the official DD-Form 214, which must include the character of service/type under honorable conditions (i.e., with an honorable or general discharge). This will be annotated in block 24 on member copy 2, 4, or 7 of the DD-Form 214 If you are also claiming 10-point preference and/or 30% Disabled Veteran, you must submit a VA Letter or a disability determination from a branch of the Armed Forces (or documentation of Purple Heart, if applicable).
    • Current or Former Federal Civilian Employees (includes current Air Force employees): You must submit a legible copy of a SF-50, Notification of Personnel Action. The SF-50, block 24 must contain "1" or "2" AND block 34 must be a "1". Employees eligible under an OPM approved interchange agreement, block 34 may contain a "1" or "2".
    • Promotion Consideration: If you wish to be considered as a promotion candidate and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one-year time-in-grade requirements. You will need to provide additional SF-50s which clearly demonstrate you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within Grade/Range Increases, and SF-50s with an effective date more than one year old).
    • If you are requesting a reasonable accommodation to the USA Hire Competency Based Assessments, submit documentation to support your request, including the Reasonable Accommodation Request Form found here
    • Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible: You must include a copy of the Military Spouse PPP Self-Certification Checklist along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain a copy of the Military Spouse PPP Self-Certification Checklist.

    Reasonable Accommodation (RA) Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended and Americans with Disabilities Act 1990 as amended, that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a reasonable accommodation in your online application. Requests for Reasonable Accommodations for the USA Hire Competency Based Assessments and appropriate supporting documentation for Reasonable Accommodation must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for Reasonable Accommodations are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments, if you received the link after the close of the announcement. To determine if you need a Reasonable Accommodation, please review the Procedures for Requesting a Reasonable Accommodation for Online Assessments here.

  • Benefits

    Benefits

    A career with the U.S. Government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Learn more about federal benefits.

    Review our benefits

    Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time, or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Help

This job is open to

  • Career transition (CTAP, ICTAP, RPL)

    Federal employees who meet the definition of a "surplus" or "displaced" employee.

  • Federal employees - Competitive service

    Current or former competitive service federal employees.

  • Federal employees - Excepted service

    Current excepted service federal employees.

  • Individuals with disabilities

  • Land & base management

    Certain current or former term or temporary federal employees of a land or base management agency.

  • Military spouses

  • Peace Corps & AmeriCorps Vista

  • Veterans

Clarification from the agency

Eligible NAF employees are considered under Hiring Path - "Federal employees-Excepted service"


Related jobs

»GENERAL ENGINEER
2020-06-02
»GENERAL ENGINEER
2020-06-02
»GENERAL ENGINEER
2020-06-02
»GENERAL ENGINEER
2020-06-02
»GENERAL ENGINEER
2020-06-02
»GENERAL ENGINEER
2020-06-02
»GENERAL ENGINEER
2020-06-02
Report job