Machine operator/assembler/production worker

Machine operator/assembler/production workerWork Location:13515 N. StemmonsDallasTexasUSA75234Essilor ESSENTIAL FUNCTIONS: § Coating:o Clipper: Clip and secure lenses into baskets to begin the coating process.o Machine Operator: Prepare and operate the coating machine to coat the lenses properly.§ Load machine chemicals§ Load and unload sectors with lenseso Inspector: Inspect lenses to ensure that they are optically and cosmetically accurate. § Finishing:o Beveler: Utilize the bevel wheel to remove the sharp edges of the lens.o Mounter: Accurately apply drill holes to the lenses to ensure proper fit and alignment of the lenses and insert lenses into the frame while ensuring proper fit.o Edger Operator: Operate a variety of edging machines to cut lenses down to proper size and shape to fit the appropriate frame.o Finish Layout: prepare an uncut lens for the edging process by outlining the center/alignment markings and affixing the chuck/block.o Tinter: Accurately tint all lenses going through the tinting department.o Inspection: Inspect lenses and frames to ensure that they are optically and cosmetically accurate. § Surfacing:o Surfacing Blocker: Utilize the blocking machine to accurately secure a block to all lenses going through the surfacing department. Operate taping equipment to apply protective tape to the front of the lenses.o Generator Operator: Operate the generator machine used to cut the lenses to the correct prescription.o Surface Finer/Polisher: Operate the equipment used to fine and polish all lenses going through the surfacing department.o Lens Washer: Hand wash and dry lenses followed by a brief cosmetic inspection of the lenses. Grasp lens with de-blocking cup and strike against table to remove block from lenses. Remove tape from lenses.