Riggers
Richard Construction Inc. (RCI) is currently seeking experienced Industrial Journeyman Riggers.Position SummaryRiggers will be responsible for the lifting and movement of heavy equipment and materials. They will inspect all applicable rigging. Plans for lifts using weight of the load, lifting capacity of the equipment, and other relative information needed to safely plan any heavy load movement. Attach load using slings, chains, cables, hooks, shackles, and other related equipment. They will be responsible for signaling crane or hoist operators during lifts with proper instructions.RCI has various levels of Rigger positions based on experience and skills ranked as follows:
Rigger Leadman: NCCER Certified (Rigger Advanced preferred). Attaches rigging to loads to provide proper support and load distribution in preparing them to be moved by a crane or other mechanical means. Will use hand or power tools as required to prepare the materials for rigging and movement. Aligns, levels, and anchors machinery onto foundations or structures. Controls movement of heavy equipment or materials through narrow openings or confined spaces, using chainfalls, gin poles, gallows frames, or other applicable rigging equipment. Can fabricate, setup, and repair rigging, support structure, hoists, and pulling gear. Must have 5+ years experience in rigging operations.
Rigger I: NCCER Certified (Intermediate Level preferred). Same as "Rigger Leadman" but with 95% ability or greater. Must have 4+ years of experience working as a Journeyman Rigger of a Rigger Helper.
Qualification Highlights:
Must possess all knowledge skills and abilities for position (see below)
Must be able to successfully complete a designated Rigging Assessment
Must meet all physical requirements
Must be able to work at heights in excess of 300 feet in elevation
Must have all required tools
Must be able to regularly and reliably show up at the assigned job site
Must meet all safety and security requirements at the assigned job site
Position Responsibilities:
Act as safety observer on equipment lifts
Inspect all rigging equipment and be able to identify frayed, worn, or damaged parts
Plan or assist in planning of equipment or material lifts
Attach load using slings, chains, shackles, hooks, cables, and other rigging equipment
Tie ropes (Tag Lines) around loads or materials for use of guiding during lifting and positioning of loads into place
Guides load during left and positioning
Climb structures to guide and position loads
Capable of using fall protection appropriate through any load lift and placement
Assist in connecting or stabilizing of load prior to detaching load from lift equipment
Detach loads and remove rigging equipment
Place and remove outrigger pads from cranes and other heavy equipment
Identify all tools required for tasks
Identify safety risks and precautions required to eliminate those risks
Required Qualifications:
Must have specific knowledge of rigging equipment and their capacities
Must have knowledge of required tools and their proper use
Must be a team player and have effective communication skills in dealing with coworkers and any other related contacts
Must have basic knowledge of the construction processes involved in heavy industrial construction
Must be able to use problem solving skills and logical thinking to resolve and identify issues, including safety risks
Must know proper hand signals to communicate with equipment operators
Must have knowledge regarding lift planning including but not limited to the proper equipment to use, the load capacities of equipment and the lifting equipment
Must have basic transportation knowledge with regards to moving equipment and loads from one location to another, including identification of visible ground conditions that may impede movements and require Requests for Information (RFIs)
Knowledge of arithmetic required to plan for a lift
Must be willing to follow all company directives and safety procedures
Must be able to work at heights
Must have reliable transportation
Preferred Qualifications:
Richard Construction Inc. (RCI) former employee from a Reduction of Force (ROF)
National Center for Construction Education and Research (NCCER) Certification as an Industrial Rigger
Formal/Technical education
Candidate Possession of Required Tools:
Sleeve Bars with Holder
Spud Wrenches
Adjustable Spud
1-1/4" Spud
1-7/16" Spud
Bolt Bag
Channel Locks
Rigged Out Tool Belt
4lb. Hammer
6lb. to 8lb. Hammer
32 oz. Ball Peen Hammer
Center Punch
Wire Cutters
Qty 2 - 12" x 24" Framing Squares
Qty 2 - 6" x 12" Squares
Safety Toed Boots
Reports to Position:
The position will work closely with and occasionally oversee helpers or laborer positions.
The position will hold a positional and expertise authority that mentors the helper or laborer positions
Physical Requirements:
Employee will be required to adhere to large amounts of standing, walking, bending, squatting, and lifting
Will talk and hear in order to communicate effectively
Must have good dexterity with hands and fingers to perform rigging connections
Able to use arms and hands to signal, grad, hold, turn, and push or pull objects such as materials, controls, and tools
WIll be required to lift, carry and move objects up to 50 lbs in weight
Will work at heights, climb ladders and stairways, and work off platforms
Will occasionally work out on an open structure using the appropriate fall protection requirements
Will work at heights up to 300 feet utilizing proper fall protection devices
Will use vision abilities to focus, see short distances, see colors, possess depth perception and peripheral vision
Must be capable or working outdoors in the elements including but not limited to the heat, cold, rain, snow, and wind
Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, earplugs/muffs, safety vests, gloves, steel toe/safety toe boots, and masks/respirators
RCI is dedicated in providing a SAFE and Drug Free environment.RCI is an Equal Opportunity Employer (EEO).