AIRCRAFT MECHANIC

Summary THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a AIRCRAFT MECHANIC, Position Description Number D0483000/D0484000/D1063000 and is part of the CO AASF, National Guard. Responsibilities WG-10: Responsibility for the performance of the full range of aircraft maintenance duties including troubleshooting, preventive maintenance, repair, and ground testing of assemblies, system, and surfaces for one or more types of military aircraft, fixed and rotary wing. Perform inspections, functional checks, and preventive maintenance on assigned aircraft to include pre-inspection, daily inspection, pre- and post-flight inspections and such special inspections as required, including fuel contamination checks, oil sampling, an inspection of onboard emergency equipment. Troubleshoots, diagnoses, and performs unscheduled maintenance on assigned and transient aircraft. May be required to perform such additional duties as firefighting, aircraft crash/rescue, snow removal, etc. Perform other duties as assigned. WG-11: Perform duties and has responsibilities understood under the military designation of Crew Chief which involves full maintenance responsibility for a required minimum number of aircraft as determined by type of aircraft. Performs Crew Chief duties with full maintenance responsibility for assigned aircraft. Performs the full range of preventive maintenance, repair, and ground testing of aircraft system, assemblies, and surfaces. Plans and conducts a flight training program for drill status crew chiefs to include maintenance instruction for assigned aircraft, the use of hand and arm signals used, ground handling of aircraft, use of ground equipment, aircraft loading, hoist operations, emergency procedures, etc. Performs other duties as assigned. WG-12: The purpose of this position is to act as the Aircraft Mechanic (Crew Chief) with responsibility for managing the operational readiness of one or more aircraft, and proficiency training of supported aviation unit personnel. Manages, monitors or performs overall maintenance, servicing, inspections and documentation for one or more highly technical, high performance military aircraft. Ensures Unit Level Logistics-Aviation (ULLS-A) and other aircraft documentation accurately reflects status and airworthiness of assigned aircraft. Clears Red X status symbols on aircraft forms for work performed by others. Plans, develops and conducts proficiency training during the technician work week to a multi-faceted workforce comprised of Full Time Support (FTS) and supported unit personnel. Prepares for and participates in various types of readiness evaluations, inspections, mobilization and support exercises. Complies with safety, fire, security, environmental, and housekeeping regulations. Performs other duties as assigned. Requirements Conditions of Employment Qualifications Military Grades: E-3 thru E-7 Preferred Compatible Military Assignments: 15T MOS 1. Specialized experience will be used to determine qualifications for the announced position. 2. An applicant's RESUME must provide, in detail, how they meet each specialized experience listed below. 3. It must be documented with "from (mm/yy)" and "to (mm/yy)" dates and description of the specialized experience. DO NOT copy each bullet listed below word for word and place into your resume; you must describe your personal experience as it pertains to each bullet. You will be immediately disqualified if you fail to include specialized experience in your resume. WG-10/11/12 must have at least 18 months of Specialized Experience in each of the following: 1. Experience installing, adjusting, aligning, troubleshooting and functionally testing the various major and minor mechanical and pneudraulic systems on an aircraft during overhaul or modification. 2. Experience coordinating the work of other mechanics, and scheduling maintenance to ensure completion of critical actions and optimum workflow. 3. Experience instructing lower graded mechanics, military and other personnel in the disassembly and re-assembly of crash damaged engines, transmissions, gearboxes, hydraulic components, and fuel controls sufficient for the exhibit to be returned to its shipping container. Education Education cannot be substituted for Specialized Experience for this position. Additional Information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)). 1. If you would like to inquire about joining the Colorado Army National Guard, please contact (720) 250-1351. 2. PCS funds are not available (unless otherwise stated). 3. Be advised that if selected for a military technician position where membership in a reserve component is a condition of employment, your bonus may be terminated and may or may not be subject to recoupment. Questions pertaining to recoupment may be directed to the State Incentives manager at (720) 250-1337. 4. AGR positions are not announced/applied for on USA Jobs. Contact your respective AGR offices for instructions on how to apply for AGR positions. 5. A security clearance may be required for this position. Please contact the selecting supervisor or state security manager with questions regarding clearances. (Failure to obtain/maintain a security clearance may be grounds for termination from the Technician program.) 6. Unless stated otherwise: Must be fully qualified or able to obtain MOS within one year hire if this position is listed as immaterial against NGB compatibility requirements. If there is a compatible, required, or restricted MOS listed in this announcement - you will need that MOS to qualify for the position. If this position requires specific ASVAB scores, please contact the selecting supervisor with any questions. 7. This position may be contingent on the vacancy of the incumbent even if not otherwise stated in this announcement. Please contact the HRO with any questions regarding hiring dates. 8. Per ARNG-HRH Policy Memorandum #10-39, mandatory Full Time Staff (FTS) training is required within a year of hire as a condition of employment in vacancy announcements for both Technician and Active Guard Reserve positions. Failure of new FTS personnel to complete NGB prescribed courses at PEC within the first year of employment may be cause for reassignment to other full-time positions or termination of their employment. 9. We use E-Verify to verify the identity and employment eligibility of all persons hired.